HBH MEDIZINTECHNIK GMBH

Potential to exhibit a loose connection between the flexible tubing and the nasal cannula, during assembly or while in use, which may result in loss of CPAP pressure, possibly reducing the effectiveness of treatment and lead to decreased oxygenation until connection is restored.

The HSG Procedure Trays and Endosee System Convenience Kits contain non-sterile iodine pouches, however the peel away lid labels incorrectly identify the iodine pouches as sterile.

The warming surfaces or incubator well temperatures of the listed products may exceed the desired set temperature. If temperatures exceed the desired set value, the device will alarm appropriately.

During the manufacturing process the devices were laser-marked with the incorrect part number.

Low concentration of sodium pyruvate in the wash could compromise gamete development

The firm has become aware of a sudden increase in complaints for three associated lots. Performance issues may lead to impaired embryo development prior to the blastocyst stage.

Incorrect component descriptions within the "Contents" section on the Tyvek lid for individual kit trays.

It has come to CooperSurgical's attention that the affected Product may contain a medium other than the Global Total LP single step medium which does not contain the protein source required for embryo culture and development.

The affected product may contain a medium other than the Biopsy Medium. There is a risk that use of the Product from this lot could cause degradation of the embryo.

Firm has received 11 complaints involving a loose or detached metal clips, including 3 cases where the metal clip was ingested by the patient, and 3 cases where the metal clip was removed from the patient's mouth. In one case, the patient suffered a laceration to the throat.

There is a potential breach to the sterile barrier containing the Humidifier Bottles due to the packaging of the filter box located inside the bottle packaging. Damage to the sterile barrier may result in use of an unsterilized device, which may cause contamination and degradatio…

There was translation error in the Spanish version of the IFU where the Spanish version instructs the user to leave the blastocyte to air thaw for 5 minutes rather than the correct 5 seconds as indicated in the English version.

Products in this lot may have compromised barrier seals, introducing a risk to sterility.

Incorrect bonding material used for assembly of the catheter, may fail, resulting in detachment of component parts, broken components, or leakage. This breakage may result in delay of procedure

XXX

Units are displaying output readings that differ from the measurements taken using a Gas Analyzer. When the display is reading a target setting of 5%, an external meter is reading between 3% and 12% and the Incubator does not alarm. May result in loss of embryo during storage.

The affected Wallach LOOP Electrodes were incorrectly packaged with a Round Electrode inside a package labeled as a Square Electrode.

The affected Koh Cup were incorrectly packaged with a 3.5cm Ultem Koh cup, P/N 34131-04, instead of a 3.0cm Ultem Koh cup, P/N 34131-03 as required.

The affected Milex Gellhorn pessaries were incorrectly manufactured with a long stem (2.170 ), instead of a short stem (1.670 or 1.960 nominal height) as required. The length discrepancy does not meet the released print dimensions.

There is a discrepancy between the printing on the Product Tyvek label of the individual component packaging. The Chinese characters on the label indicates that it contains an Equilibration Medium (P/N: 12220001) rather than the Vitrification Medium (P/N: 12230001) as indicated o…

Mislabeled: Printing on the top web or Tyvek lid of the individual product blister tray indicating that it contains a Pipet Current or Part Number MX140 and the display box indicating the correct Os FinderTM Cervical Dilators, Part Number 1176. The product in the individual prod…

The seal of the sterile pouch may be compromised on one lot of the Milex Cervical Dilators.

Expiration date discrepancy. Marked as 5 years. Expiration date should be 3 years.

Potential for unsealed pouches in two (2) lots of the Endosee Advance Cannula (P/N: ESPX5).

Potential for the Quantum 2000 Electrosurgery Generator, part numbers 909075, 909075-05 and 909075-05W, to cease to either cut, coagulate, or blend during a procedure when the foot pedal is used for activation.

The touchpad may not work properly after cleaning.

Discrepancy between the correct expiration dates on the individual pouches inside the boxes and incorrect expiration dates on the outer boxes, where the month and day were reversed.

The firm updated the IFU in April 2019 to clarify that use of the TRANSWARMER Mattress with other heat producing devices, such as an incubator, is prohibited and could lead to serious health consequences, such as skin burns. some products do not contain the updated IFU.

The products' cut, coagulate, or blend function may not operate with the use of the Foot Pedal.

The soft, flexible cup of the Advincula Delineator may be unvalidated and could potentiall crack when subjected to excessive compressions during use, leading to serious health consequences, such as lacerations.

2.5A slow blow fuses may have been installed in the LEEP RPECISION Generator rather than the appropriate 3.15A slow blow fuses.

ICSI CUSTOM MICROPIPETTES the thirty-degree bend is absent

There is a possibility that the seal of the sterile pouch may be compromised, thereby increasing the risk of infection.

The seal of the sterile pouch may be compromised, thereby increasing the risk of infection.

Products have been packaged with an incorrect product size.

Products have been packaged with the wrong Trocar length type.

The 2MHZ prove was incorrectlhttp://cts.fda.gov/division-tracking/images/trash.pngy labeled as a 3MHZ probe

The current secondary packaging, a box, incorrectly states that the product is latex free. The product is made with 100% latex. The label on the package that contains the product and the Instructions for Use (IFU) correctly states that the pessary is manufactured from latex rubbe…

Products contain international package insert and not the correct USA package insert

The products have been identified to contain an incorrect size Diaphragm.

The products have been identified to have incorrect size prints on the MILEX PESSARY KIT packaging. While the Pessary pouch is marked with correct size, an incorrect label on the packaging does not meet the required release specification.

Kit Label incorrect :Labeled with Lidocaine HCI drug cartridges Lidocaine HCl (2%) but contains vials Lidocaine HCl (1%)

Product marketed without a 510(k)

Incorrect expiration date on outer carton kit label

A diaphragm size 80 labeled box was incorrectly packaged with a size 85.

Design of device may expose user to injury to fingers or body parts

Small sized specula were incorrectly packaged in printed bags for the medium sized speculum

The pad printing around the suture entry holes on the 15mm Suture Guide included in the kit may not have been appropriately manufactured resulting in the pad printing flaking off around the entry holes.

Internal gas line may malfunction causing the line to burst under pressure.

Incorrect size printed on the Milex Pessary Kit packaging label

Products without expiration date have the remote potential for minor burn

The product has been identified to contain an incorrect curette type.

Outer box is mislabeled as P/N R2010- Large Radius Loop Electrode instead of P/N R1010- Medium Radius Loop Electrode

Incorrect expiration date printed on the MILEX PESSARY KIT packaging

Unsealed pouches.

Sterility of the device may be compromised due to unsealed pouch

Trans Warmer Infant and Transport Mattress not labeled with exp.date may not meet specification