Company
Edwards Lifesciences LLC
50 recall(s) on record — most severe on record: Class I.
Recalls by year
- Recalls (50)
Registered facilities (6)
- Edwards Lifesciences Ireland Limited FEI 3017298588 · IE
- Edwards Lifesciences LLC FEI 1713910 · UT
- EDWARDS LIFESCIENCES LLC FEI 2015691 · CA
- Edwards Lifesciences FEI 3015287573 · CR
- EDWARDS LIFESCIENCES (SINGAPORE) Pte Ltd FEI 3007063218 · SG
- Edwards Lifesciences LTD FEI 3015179394 · IE
Recalls & enforcement
20261 record
- Class IIOngoing2026-03-27Labeling update to provide warning if functionality of the valve replacement delivery system is compromised.
20251 record
- Class IOngoing2025-05-14due to complaints received for 3mm to 4mm section wire exposed/protruding from the outside of the cannula body.
20234 records
- Class IIOngoing2023-10-04Their is the potential for flushing difficulties during setup of the pressure monitoring kit with pressure transducer.
- Class IIOngoing2023-09-07Inadvertent release of embolectomy catheters that may experience slower than normal balloon deflation (greater-than 15 seconds).
- Class IIOngoing2023-07-27Due to a manufacturing issue, when using valve repair systems, intended to repair insufficient mitral and/or tricuspid valves, users experienced resistance when attempting to release the implant from the delivery system by rotating the release knob. Additional torque required to …
- Class IIOngoing2023-02-14There is a potential that the distal end of the catheter may be bent beyond its intended curvature and when connected to patient monitoring device, the monitor may display an error message.
20222 records
- Class IIOngoing2022-10-06Due to an increase of confirmed latex deterioration complaints for arterial embolectomy catheters packaged in pouches.
- Class IIOngoing2022-03-01The StO2 values may be inaccurately low when using either the FORE-SIGHT ELITE Tissue Oximeter Module or the FORE-SIGHT ELITE Absolute Tissue Oximeter Monitor with the Fore-Sight Elite large sensor in certain somatic locations (arms and legs). While the StO2 absolute values are…
20212 records
- Class IITerminated2021-07-09There is a potential for internal leaks within catheters.
- Class IITerminated2021-05-26There is a potential that the pressure tubing may detach from the blood sampling system
20201 record
- Class IITerminated2020-03-27Sterile catheter kit packaging compromised.
20199 records
- Class IITerminated2019-11-27If the venous cannula is used in an unintended manner (longer than 6 hours; particularly during extracorporeal membrane oxygenation [ECMO]) there is a risk that separation of the cannula from its connector can occur; which can result in significant blood loss.
- Class IITerminated2019-10-22Their is a possibility that the cannula may separate from its connector, potentially causing a breach of circuit during cardiopulmonary bypass which could result in significant blood loss.
- Class IITerminated2019-10-07Intermittent communication due to inconsistent crimping of connectors onto cables.
- Class ITerminated2019-07-09The action has been initiated to address reports of burst balloons which have resulted in significant difficulty retrieving the device into the sheath and withdrawing the system from the patient during procedures
- Class ITerminated2019-05-14Possibility of balloon rupture in intra-aortic occlusion devices. If the balloon bursts during cardiopulmonary bypass, the heart can fill and warm, the operative site may be obscured, and the device will need to be exchanged or operative strategy would need to change, including …
- Class ITerminated2019-03-28Difficulty with atrioseptostomy catheter balloon deflation after deployment, and reports of balloon fragmentation or detachment.
- Class ITerminated2019-03-21Potential for an electrical short circuit leading to possible fire hazard due to liquid ingress into AC power outlets.
- Class IITerminated2019-01-22This action has been initiated to address complaint reports received for crimp balloon and inflation balloon component separation during TAVR procedures.
- Class IIOngoing2019-01-16Edwards Lifesciences has received a limited number of customer reports regarding an inter-lumen leak between the cardioplegia lumen and pressure lumen in the device.
20183 records
- Class ITerminated2018-12-21These Swan Ganz catheters have incorrect lumen assembly, which causes reversal of the lumens. If the lumens are reversed the clinician may note reverse PA and CVP pressure values and waveforms.
- Class IITerminated2018-06-11SAPIEN 3 THV was packaged with the incorrect valve size with respect to the label.
- Class IITerminated2018-03-30Possible leak at distal open end of the strain relief, which causes medical staff to continue adding inflation fluid to maintain balloon pressure for adequate occlusion of the ascending aorta.
20173 records
- Class IITerminated2017-10-02Pre-procedural issues related to software defects
- Class ITerminated2017-07-21A component in the Certitude Loader may have a molding overflow defect that could detach during advancement of the delivery system and potentially embolize from the loader into the patient.
- Class IITerminated2017-07-06The diameter of the Fogarty Catheter balloon, measures 6mm instead of 10mm.
20157 records
- Class IITerminated2015-11-13Edward Lifesciences is recalling Intravascular (IV) Administration Sets due to the requirement of an additional FDA submission to support commercialization (clearance) of the devices.
- Class IITerminated2015-11-04Edwards Lifesciences initiated a field action for the Thin-Flex Venous Cannula (Model TF292902A) because the connector size is incorrectly described in the Edwards product guide as 3/8 inch. The actual and correct connector size is 1/2 inch.
- Class IITerminated2015-08-26The configuration of the slot at the tip of the knot pusher may inhibit intended ease of use. Fraying or splitting of the suture could occur, which could compromise the integrity of the suture knot.
- Class IITerminated2015-05-18Edward Lifesciences is recalling the ClearSight System because the finger component of the Heart Reference Sensor may be damaged.
- Class IITerminated2015-05-05Potential device damage on the strain relief near the hub area, which may result in blood leakage.
- Class IITerminated2015-05-05The product failed to meet the internal established statistical test requirement for heparin activity.
- Class IITerminated2015-03-23Edwards Lifesciences is recalling Fem-Flex II Pediatric Femoral Arterial Cannula sizes 8, 10, 12 French because of the potential of tissue damage caused by a protruding wire located at the tip of the cannula.
20143 records
- Class IITerminated2014-10-08Edwards Lifesciences is conducting a field action on the Vent Catheters due to the potential for disruption of the white plastic coating on the stylet.
- Class IITerminated2014-04-09Potential for separation of dilator tips.
- Class IITerminated2014-01-20Edwards Lifesciences is recalling two lot numbers of the 26mm transcatheter heart valve crimper because they may not open sufficiently when the handle is rotated in the full open position. As a result, user may have difficulty fitting a 26mm Sapien transcatheter heart valve into…
201312 records
- Class IIITerminated2013-11-20Edwards Lifesciences is recalling one lot of Ergonic instrument due to mislabeling. Ergonic scissors standard curved labeled as a Double Acting DeBakey forcep. Edwards control confirmed that the laser etching on the device was incorrect.
- Class ITerminated2013-09-16Edwards Lifesciences is recalling certain lots of EMBOL-X Glide Protection System due to deformation of the cannula tip.
- Class IITerminated2013-08-26Edwards Lifesciences is recalling two lots of Duraflo Cannulas due to reported complaints involving cracks in the t-connector of the devices which were confirmed during product evaluation.
- Class IITerminated2013-07-31The Edwards Lifesciences FloTrac Sensor is being recalled due to a manufacturing non-conformance related to incorrect packaging configuration where the IFU was placed on top of the Tyvek instead of being placed at the bottom of the box. There is no evidence available at this time…
- Class IITerminated2013-07-30Edwards Lifesciences is recalling certain lots of the Anastaflo intravascular Shunt due to concerns of excessive adhesive on the shunt body that may interfere with suturing of by-pass grafts.
- Class IITerminated2013-07-16Edwards Lifesciences is recalling certain lots of the EndoReturn Arterial Cannula that were built with an incorrect component. This component can create a performance problem with the IntraClude IntraAortic Occlusion device.
- Class IITerminated2013-06-19Edwards is recalling certain lots of Rigid Suction Wands because they discovered plastic particulate inside the sterile pouch and within the internal diam ether of the wand.
- Class IITerminated2013-05-14Edwards is recalling the QuickDraw Venous Cannula due to complaints of cannula separation during withdrawal of the device when the Percutaneous insertion method is used.
- Class IITerminated2013-03-26Holes in the sterile barrier pouch may be caused by handling of the device during manufacturing or once pouches have been removed from the unit box and stored on the shelf by customers.
- Class IITerminated2013-03-14Two unsealed pouches were found at an Edwards' distribution location in Japan. Incorrectly sealed pouches may result in a sterility barrier breach.
- Class IITerminated2013-01-30The device is being recalled because the firm has received multiple complaints related to incorrect assembly that may result in dilution of blood samples.
- Class IITerminated2013-01-25Edwards Lifesciences is recalling certain Proplege Coronary Sinus Catheter, model PR9 due to confirmed reports of blood leakage through the hemostasis valve in the introducer that is kitted with the catheter.
20122 records
- Class IITerminated2012-06-06Edwards is recalling Suction Wand models SPC2081 and S033 because the plastic tip attached to the metal suction wand may become detached during routine use.
- Class IITerminated2012-05-11The device is being recalled because the firm received multiple complaints related to passage of a J-tip guidewire when inserted through the distal lumen hub of the catheter.
Source: U.S. FDA via openFDA (opens in a new tab) (device registration & enforcement). Data as of 2026-10-06. We restate the public record only — measured facts, never risk verdicts.
Cite this record
RegWarden. “Edwards Lifesciences LLC — FDA compliance profile.” Compiled from U.S. FDA public records (openFDA; FDA Data Dashboard). Data as of 2026-10-06. https://regwarden.com/company/oo-9040666-edwards-lifesciences-llc/
Not open yet
Alerts for Edwards Lifesciences LLC
Watchlist alerts will email you when FDA publishes a new recall, inspection classification, or warning letter for a facility you follow. They aren't open to the public yet — leave your email and we'll tell you when they are.
Planned
Want a one-page facility brief?
A single-page summary of this facility's registration and recall history for diligence. Not selling it yet — register interest and we'll follow up.