Ferno-Washington, Inc.

8 recall(s) on record — most severe on record: Class II.

Registered facilities (1)

• FERNO-WASHINGTON, INC. FEI 1523574 · OH

Recalls & enforcement

• Class IIOngoing2026-06-19
  Product may experience accelerated roller wear and potential deformation due to interference between the roller assembly and rail. In the worst-case condition, rail mechanism may become lodged during operation and movement of the stretcher along the rail may no longer be possible
• Class IIOngoing2025-09-11
  The fastening post hardware could loosen allowing the fastening post to detach from the cot
• Class IIOngoing2022-10-07
  Batteries could become unstable when not properly maintained and/or subjected to repeated drops, power washing directly into battery contacts or abuse, may result in a fire and/or injury
• Class IITerminated2017-03-08
  The recall was initiated as a result of the detection of an incorrect nut used in manufacturing.
• Class IITerminated2016-03-10
  On March 9, 2016, the firm was contacted regarding the possibility of incorrect labeling on the outside poly- bag of the traction splint straps. The firm investigated and determined its supplier had labeled the outside packaging for the pediatric and adult traction splints straps
• Class IITerminated2015-08-03
  Hole elongation in the telescoping load frame channel. A hole elongation could affect the ability of the retention pin to stay seated which is necessary to preclude movement of the telescoping load frame.
• Class IITerminated2015-05-01
  The firm discovered an improperly installed set screw in one caster arm assembly on a unit in production. The screw assists in preventing the bearing cup on the caster assembly from backing out of the caster arm during use.
• Class IITerminated2014-12-03
  The wheel castor assemblies may be loosening on the stretchers.